Basic Semi-preparative Guard Column with Cartridge

Short Description:

The systematic analysis of pharmaceuticals, natural products, and environmental and industrial chemicals with complex sample matrices can shorten the life of analytical columns and reduce their chromatographic performance. uHPLCs guard columns to enhance the performance of analytical columns by removing particulate contaminants and chemical contaminants that may be present in the mobile phase liquid.

ISO 9001 certified

Advantages:

1, Economical

2, Extended column life

3, Quick column replacement

Send email to us Download as PDF

Product Detail

FAQ

Product Tags

• Semi-preparation guard column
• Protect HPLC column from damage by chemical pollutants
• C18, C8, C4, phenyl, cyano...
• Away from: broad peak, split peak, high back pressure, low degree of separation, baseline noise drifting

Basic Guard cartridge column for semi-preparative

Why is a guard column necessary?
The guard column serves to pre-trap substances that will be firmly adsorbed by the analytical lc column and cannot be washed by the mobile phase. The guard column serves to pre-trap substances that will be firmly adsorbed by the hplc column and cannot be washed by the mobile phase.

The packing of the guard column is usually the same as that of the analytical hplc column, but it is not necessary to stick to this point if you know what you want to capture. The inner diameter should not exceed that of the lc column, and a length of about 1-2 cm is sufficient; this is because the damage to the column is, in most cases, only a small portion of the packing on the inlet side of the column. It is recommended to use the Proecolumn and Guard column as described above to extend the life of the analytical column.